11
17. Press a 60mm Square Inner Cap (62) into the top
of the Lat Tower (17). Press two 48mm Round
Inner Caps (68) into the Weight Carriage (18).
Slide the Weight Carriage (18) onto the Lat Tower
(17) as shown. Orient the Carriage Stop (63) with
the lip of the Carriage Stop Bushing (64) on top.
Slide the Carriage Stop onto the Lat Tower.
Slide the Lat Tower (17) onto the Lat Tower
Stabilizer (20). Attach the Carriage Stop (63) at
the indicated hole in the Lat Tower with an M10 x
86mm Bolt (48) and an M10 Nylon Locknut (47).
Attach the Lat Tower to the Lat Tower Stabilizer
with three M10 x 72mm Bolts (74), three M10
Washers (32), and three M10 Nylon Locknuts
(47).
17
17
47
62
32
32
68
74
74
Attach the
Carriage Stop
(63) here.
68
20
47
63
64
48
18
19. Route the Cable (46) around an 89mm Pulley
(65). Attach the Pulley to the bracket on the Lat
Tower Stabilizer (20) with an M10 x 45mm Bolt
(43) and an M10 Nylon Locknut (47).
19
20
46
47
65
43
18. Route the small ball on the Cable (46) through
the Foot Plate (52) and the Lat Tower Base (20).
Attach an 89mm Pulley (65) to the Foot Plate,
above the Cable, with an M10 x 50mm Bolt (81)
and an M10 Nylon Locknut (47).
Attach the Foot Plate (52) to the Lat Tower
Stabilizer (20) with an M10 x 25mm Bolt (69).
Attach the Foot Plate (52) to the Bottom Crossbar
(53) with two M10 x 78mm Bolts (51), two M10
Washers (32), and two M10 Nylon Locknuts (47).
Tighten the M10 Nylon Locknuts (32) used in
steps 12–17 and 23.
18
20
53
47
47
32
32
81
52
51
46
65
69
Large
Ball
