background image

3

IMPORTANT PRECAUTIONS

WARNING:

To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your exercise rack before using your exercise rack.

ICON assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over age 35 or per-

sons with pre-existing health problems.

2. Read all instructions in this manual and all

warnings on the exercise rack before using

the exercise rack.

3. It is the responsibility of the owner to ensure

that all users of the exercise rack are ade-

quately informed of all precautions.

4. The exercise rack is intended for home use

only. Do not use the exercise rack in any

commercial, rental, or institutional setting.

5. Keep the exercise rack indoors, away from

moisture and dust. Place the exercise rack

on a level surface, with a mat beneath it to

protect the floor or carpet. Make sure that

there is enough clearance around the exer-

cise rack to mount, dismount, and use the

exercise rack.

6. Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

7. Keep children under age 12 and pets away

from the exercise rack at all times.

8. The exercise rack is designed to support a

maximum user weight of 300 lbs. (136 kg).

9. Always wear athletic shoes for foot protec-

tion while using the exercise rack.

10. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

Summary of Contents for GGBE0969.1

















Reviews: