The machine is equipped with a front guard to
protect the engine from damage caused by
impact.
The throttle lever is located in the front right-hand
side of the machine.
Increase or decrease the engine rate by gradually
moving the lever.
Safety frame
Hand throttle
●
Allow the engine to idle.
●
Release the Gear Stop lever.
●
Select the transmission ratio (consult the
Gearbox chapter).
●
Gradually depress the Gear Stop lever to
disengage the safety linkage in the device.
●
Gradually accelerate the engine.
●
Allow the engine to idle.
●
Release the Gear Stop lever.
●
Move the gearshift lever to the idle position.
●
Remember to disengage the PTO if used.
How to start the machine
DANGER
The machine could respond in a
dangerous way if the Gear Stop lever is
depressed too sharply.
IMPORTANT
Before starting the machine, make sure
you become familiar with its main
controls: transmission, PTO, diff lock,
how to stop the engine and the Gear
Stop.
IMPORTANT
Lengthy clutch disengagements could
wear out the thrust bearing.
How to stop the machine
GOLDONI S.p.A.
JOKER
EN Inglese
99
OPERATING INSTRUCTIONS