GOLDONI JOKER 10 DS Operation And Maintenance Download

Page: 30 / 60

km/h

- with engine at 3600 Rpm (the values are purely indicative).

The data are calculated with wheels: 5.00x10"

km/h

- with engine at 3600 Rpm (the values are purely indicative).

The data are calculated with wheels: 6.50/80x12"

SPEEDS

Speed Chart

Soil working direction

First speed gear. Second speed gear. Third speed gear. Fourth speed gear.

Forward

1.12

1.72

4.24

6.18

Reverse

0.79

1.21

2.99

Mowing direction

First speed gear. Second speed gear. Third speed gear. Fourth speed gear.

Forward

0.79

1.21

2.99

4.35

Reverse

1.12

1.72

Soil working direction

First speed gear. Second speed gear. Third speed gear. Fourth speed gear.

Forward

1.33

2.05

5.05

7.36

Reverse

0.93

1.44

3.56

Mowing direction

First speed gear. Second speed gear. Third speed gear. Fourth speed gear.

Forward

0.93

1.44

3.56

5.18

Reverse

1.33

2.05

GOLDONI S.p.A.

JOKER

EN Inglese

TECHNICAL SPECIFICATIONS

Summary of Contents for JOKER 10 DS





























































Search results

Summary of Contents for JOKER 10 DS

Reviews:

Related manuals for JOKER 10 DS

Brands by name

Popular brands

GOLDONI JOKER 10 DS, Operation And Maintenance

Search results

Summary of Contents for JOKER 10 DS

Reviews:

Related manuals for JOKER 10 DS

Brands by name

Popular brands