49
5.6 SEAT
If necessary adjust seat distance from steering wheel (with lever n.11 fig.1). Use
knob n.1 fig.6, to adjust seat firmness.
5.7 WHEELS
TYRE INFLATION PRESSURES
Tyre
Front
Rear
Bar
KPa
Bar
KPa
7.50 - 16
1,8
180
1,6
160
8.25 - 16
1,8
180
1,6
160
11.5/80 - 15.3
1,8
180
1,6
160
7.50 - 20
1,8
180
1,6
160
7.50 - 16XS
1,8
180
1,6
160
7.50 - 18
2,8
280
2,6
260
260/80 - R20
1,8
180
1,6
160
9.5 - R20
1,8
180
1,5
150
250/80 - R18
2,7
270
2,5
250
9.00 - R16XS
1,8
180
1,6
160
29x12.50-15
1,4
140
1,4
140
5.8 REGISTRATIONS
5.8.1 Registering the clutch cable.
When the pedal free travel is less than 10 mm, register it with adjuster n.1 fig.13.
You can also change the position of the cable fixing hole at the end of the clutch
housing.
5.8.2 Registering the parking brake cable
If braking park travel is not enough to brake the tractor, turn the adjusting screw
to the left or the right, n.2 fig.13, to increase cable tensioning.
5.8.3 Registering the mud scraper blade
The tractor has a mud scraper blade that can be adjusted for the type of wheel
gauge selected.
In the front (n.2 fig.8), registration is done by moving the blades in their fixing
slots.
At the rear (n.3 fig.6), the blades can be positioned as shown in fig.15.
Important:
Minimum distance between blade and tyre must not be less than
5mm.
