AquaRite Long Life
Electrolytic Chlorine Generator
CONTROLS BACTERIA AND ALGAE
In Residential Swimming Pools and Spas
READ THIS LABEL AND OPERATION MANUAL BEFORE
USING. PRECAUTION:
A maximum of 95,000 Litres (25,000 Gallons) of water can be treated with one
AquaRite Long Life Electrolytic Chlorine Generator unit. Operating the AquaRite Long Life
Electrolytic Chlorine Generator without water flow through the AquaRite Long Life
Electrolytic Chlorine Generator cell can cause a build-up of flammable gases which can result
in fire or explosion .The AquaRite Long Life Electrolytic Chlorine Generator protects itself
against this condition via the FLO sensor by cutting off the power to the AquaRite Long Life
Electrolytic Chlorine Generator cell whenever flow is not detected. The AquaRite Long Life
Electrolytic Chlorine Generator MUST be wired to the same circuit as the filter pump. This
ensures that the AquaRite Long Life Electrolytic Chlorine Generator will only generate
chlorine when the filter pump is providing flow. The AquaRite Long Life Electrolytic
Chlorine Generator generates a maximum output of hypochlorous acid equivalent to 0.45 kg
of chlorine per day. Do not use this device with bromide products.
KEEP OUT OF REACH OF CHILDREN
NOTICE TO USER:
This pest control product is to be used only in accordance with
the directions on the label. It is an offence under the Pest Control Products Act to use
this product in a way that is inconsistent with the directions on the label.
SWITCH:
(The switch is ignored when operation is Remotely Controlled)
Super-Chlorinate: Chlorine is produced at the maximum rate, regardless of the “Desired
Output %” dial for the remainder of the current filtering period (maximum 24 hours).
Auto: Chlorine is produced at the rate determined by the “Desired Output %” dial.
Off: Chlorine production is turned OFF. The power is controlled by the filter pump timer.
CHLORINE LEVEL DIAL:
(The Desired Output dial is ignored when operation is Remotely Controlled)
Adjust the “Desired Output %” dial to control the amount of chlorine produced.
Periodically check the pool chlorine level and adjust the dial up or down as required.
For swimming pools, a minimum of 1 ppm of free available chlorine must be
maintained.
For Spas, a minimum of 3 ppm of free available chlorine must be maintained.
LCD DISPLAY:
Displays salt level in ppm (parts per million).
Summary of Contents for AquaRite Long Life
Page 11: ...4 Diagram...
Page 12: ...5 Diagram...
Page 14: ...7 Generator has stopped producing chlorine Inspect clean or replace if necessary...
Page 27: ......
