background image

GoldenEar

 

Invisa Signature Point Source Manual

FOR BEST IMAGING: For in-wall installations of L/R mains, measure the distance from your main listening area to 
the left front speaker (we’ll call this distance “X”). For optimal imaging and largest soundstage, place speakers  

“X” distance apart from each other (and no less than 

3

/

4

 of that distance — 

3

/

4

 of “X” up to “X”). For Home Theater 

installations with L/C/R in-walls, place the center speaker above or below your TV, whichever position is closer to 

ear level, as show in the figure below. For horizontal installations, see "Rotating the Tweeter for Horizontal  

Applications" section on page 10.

Positioning Invisa

®

 as Surrounds/Rears

When used as surround speakers in a 5.1 system, Invisa

®

 speakers may be located on the side, above, or behind 

the listeners. When used on the sides, take care never to locate the speakers forward of the listeners (A). If the 

speakers are placed along the rear wall as surrounds, it is suggested that they be positioned fairly wide apart 
if possible, in-ceilings in the corners is also a good location. For instance, if there is a couch in the center of the 

rear wall on which the listeners will sit, try to position the speakers wider apart than the couch (B). Rear speakers 
in a 7.1 system should be placed fairly close together (4-6 feet) as shown (C). Surround and rear speakers should 

always be positioned as high as possible in the room for non-Atmos systems. For systems with height channels, 
always position the non-height channels at ear level.

5

Positioning Invisa

®

 Signature Point Sources as Left/Right/Center Fronts

5.1 System Rear Speaker Location Options

Invisa PointSource_Manual_06_27_2021.indd   5

Invisa PointSource_Manual_06_27_2021.indd   5

6/27/21   1:22 PM

6/27/21   1:22 PM

Summary of Contents for Invisa SPS
















Reviews: