Invisa Signature Point Source Owner’s Manual
GoldenEar
Invisa Signature Point Source Manual
Speaker Placement
GoldenEar Invisa
®
Signature Point Source speakers are designed to allow flexible placement while providing a
very large window of sound throughout your listening room. Please remember that although the following
recommendations are usually valid, all rooms and listening sets-ups are somewhat unique. Remember, whatever
sounds best to you is correct.
Room Acoustics
GoldenEar Invisa
®
Signature Point Source speakers are designed to provide exceptional sound in a wide variety
of domestic settings. It is important to note however that listening room construction, dimensions and furnishings
all play a part in the quality of sound you will ultimately achieve from your new speakers. The listening room will
impose its own character on the performance capabilities of the speaker system. Regarding the room, please
note that:
• Mid and high frequencies are affected by the amount of soft furnishings in your room — curtains, carpets,
sofas, wall coverings, etc. An excess of such items can result in a somewhat dull sound. The same room
without any soft furnishings can produce an overall bright sound. The typical quantity of soft furnishings
found in most living environments provides the right acoustic characteristics to allow the speakers to
sound balanced. To help control for these differences, your new Invisa Signature Point Source speakers
have a high frequency EQ switch to increase or decrease the HF level to accommodate different room
acoustics and placements;
• Concrete floors and walls tend to aggravate low-frequency standing wave problems;
• Rooms where height, width and length are similar can exhibit significant low-frequency standing
wave problems. This may result in reduced clarity. In such rooms avoid corner placement to minimize
acoustic problems.
The extra care you take in correctly positioning the speakers will result in greater listening enjoyment. So, keep the
following guidelines in mind when deciding on the best speaker placement.
To ensure the best performance possible, observe the following placement guidelines:
LOCATION: When preparing to install your speakers pick a location that has the required clearance between
wall studs or ceiling joists. Make sure to check for wiring, conduit, water pipes, HVAC ducts and other obstructions
before cutting the installation hole.
ACCURATE TIMBRE: For the most accurate and natural timbre, for in-wall music installations, speakers’ high-
frequency drivers should be at approximately ear level. Stereo pairs should be placed approximately equal
distance apart. Select locations that allow the sound to reach the listening area unobstructed by furnishings.
BALANCED BASS: Placing speakers in corners will over-emphasize bass and reduce overall clarity. If possible,
position speakers away from either side wall. This will ensure better bass performance and optimal
midrange clarity.
4
Invisa PointSource_Manual_06_27_2021.indd 4
Invisa PointSource_Manual_06_27_2021.indd 4
6/27/21 1:22 PM
6/27/21 1:22 PM
