16
ASSEMBLY/ DISASSEMBLY
BATTERY INSTALLATION/REMOVAL
Figure 8
Figure 9
Figure 10
1. Use the screws, washers, and nuts provided to connect the positive (red booted)
connector of each cable to the positive (+) terminal of each battery. See figure 8 and
figure 9.
2. Use the screws, washers, and nuts provided to connect the negative (black booted)
connector of each cable to the negative (-) terminal of each battery.
3. Place the batteries into the battery tray. Be certain the color coded connectors match.
Refer to the “Battery Connection Diagram” shown in figure 7 on page 15.
4. Secure the batteries in place using the buckle straps. See figure 10.
5. Connect each color coded battery cable connector to the corresponding connector on
the base unit. See figure 10.
6. Install both battery covers.
7. To disassemble, reverse the above process.
Battery shown with
cable connected
properly.
Nut
Black (-)
Red (+)
Color Coded
Connector
Color Coded
Connector
Lock Washer
Flat Washer
Battery Terminal
Ring Terminal
Flat Washer
Bolt
Battery
Buckle Strap
Buckle Strap