14
ASSEMBLY / DISASSEMBLY
JOYSTICK INSTALLATION/REMOVAL
1. Loosen the joystick adjustment knob. See figure 5.
2. Slide the joystick assembly into the joystick bracket to the desired position.
3. Tighten the adjustment knob.
4. Route the joystick cable up between the arm receiver tube and the seat. See figure 18
on page 20.
5. Connect the cable to the joystick, and secure the cable to the joystick bracket clip. See
figure 5.
6. To disassemble, turn the joystick controller off, then reverse the process above.
Figure 5
Power Cable
Seat Post Stinger
Seat Swivel Handle
Backrest Angle
Adjustment Lever
Seat Post
Joystick Cable
Adjustment Knob
Figure 1
Figure 2
Figure 3
Figure 4
