background image

23 

 

OPERATION

 

The Joystick 

 

The joystick (see figure 20 on page 21) controls the speed (up to the maximum limit set 
by the speed dial) and direction of your power chair. 

Pushing the joystick away from the neutral (center) position will move your 

Compass 

Sport

™ in the direction that the joystick is pushed. 

  

 The farther forward or backward you push the joystick, the faster your power  

chair will go.  

 
To operate your power chair, gently push the joystick in the direction in which you want 
to travel.  

 

 Gentle operation of the joystick will provide you with smoother changes in speed an 

direction. 

 

 Sharp or jerky operation of the joystick will result in quick and drastic changes in 

direction and speed. 

 

 

For  your  safety,  the  controller  automatically  sets  the  reverse  speed,         

acceleration, and deceleration in proportion to the speed control setting. 
 

 

When  you  are  not  pushing  on  the  joystick,  or  when  you  release  the          

joystick, the joystick will automatically return to the neutral position, the chair will      
decelerate, as the electromagnetic brakes are applied, and come to a smooth stop.  
 

Controlling Maximum Speed 

 
                                

The speed dial allows you to limit the maximum speed of the power chair          

                         (that is, the speed when the joystick is fully deflected) to suit your            
                         preference and environment.

 

         Speed Dial 

 

The dial offers 10 discrete steps between the lowest speed (dial set to the left) and the 
highest speed (dial set to the right). 

 
 
                               

As a visual reminder, a speed symbol (shown left) is positioned just                      

                        below the speed dial to indicate the low and high positions of the  

 Speed Symbol

            

speed dial. 

 
      Horn 

                               

The horn button is located above the power button. Press the horn 

                        button to sound the horn. The horn will sound for as long as the horn              
                        button is pressed.  

Low 

High 

Low 

High 

Summary of Contents for Compass Sport GP605 CC





































Reviews: