manualshive.com logo in svg

Golden Avenger GA541, Owner'S Manual

Share
Download
Golden Avenger GA541 Owner'S Manual Download Page 6

 

6 

I. INTRODUCTION

 

Your  Golden 

is  a  battery-operated  personal  mobility  vehicle.  Please  exercise  caution 

and consideration when you are operating it. Driving your 

carefully and thoughtfully will 

help ensure your personal safety and the safety of other people. 

                    
         

MANDATORY! 

Read completely and understand this owner’s manual before                      

        assembling, operating, transporting, or disassembling your Patriot scooter.

 

 

Before  learning  to  operate  your 

have  your  Golden    Technologies,  Inc.             

representative determine if it is advisable for you to practice getting on and off your 

and 

operating it in the presence of an attendant. 

 

BEFORE GETTING ON YOUR AVENGER  

  Check to be certain that the power is turned off. See “Operation” section in this manual.  This 

will eliminate the possibility of accidentally activating the thumb lever controls and causing 

injury to you or to others. 

  Check to be certain that your 

brake handle is in the engaged position.  See the 

“Disassembly” section in this manual. 

  Flip up the armrests. 

 

WHEN  GETTING  ON  OR OFF  YOUR 

DO  NOT  PUT  MOST  OR 

ALL  OF  YOUR  WEIGHT  ON  THE  EDGE  OF  THE  DECK.  DOING  SO  MAY  CAUSE  THE  

SCOOTER TO TIP.

 

 

GETTING ON YOUR AVENGER

    Position the seat for safe and easy mounting. See “Operation” section. 

   Carefully place one foot on the approximate center of the deck and seat yourself comfortably 

and securely on the seat. 

  Fasten the lap belt, if your scooter is so equipped. 
  Flip down the armrests. 

 

GETTING OFF YOUR AVENGER

   Make certain that the power is turned off and key is removed! 

       Flip up the armrest. 

       Unfasten the lap belt, if your scooter is so equipped. 

       Carefully place one foot on the ground, transfer your weight to that leg, and slowly come to a   

        standing position. 

       Step away from the scooter. 

 

MAXIMUM WEIGHT 

Your 

has been rated to a maximum payload (includes operator and any other carry on 

baggage) of 500 pounds.  Exceeding the maximum weight rating will void the warranty. 

 

EXCEEDING  THE  MAXIMUM  WEIGHT  RATING  MAY  ALSO  RESULT  IN     

INJURY TO YOURSELF AND/OR TO OTHERS. 

 

TURNING  TOO  SHARPLY  AROUND  A  CORNER  CAN  CAUSE  THE    

SCOOTER  TO  TIP.  AVOID  THIS  DANGER  AT  ALL  TIMES  BY  STEERING  A  WIDE  ARC 

AROUND CORNERS AND OBSTACLES.  ALSO, TO AVOID THE RISK OF TIPPING, REDUCE 

SPEED BEFORE NEGOTIATING ANY TURNS. 

Summary of Contents for Avenger GA541










































Reviews:

No comments

Brands by name

Popular brands

Load more brands