Golden Avenger GA541, Owner'S Manual

Page: 18 / 41

18
V. OPERATION
SEAT CONTROLS
Armrest Height Adjustments
To adjust the armrest height:
1. Remove the (2) 6mm adjustment screws on the back of
the armrest and raise to a comfortable position.
2. Reinsert the 2 screws.
Note: The armrest can be raised 3” and by replacing only
1 screw. You can raise the armrest and replace both screws.
Armrest Width Adjustment
To adjust the armrest width:
1. Loosen the (2) 6mm adjustment screws at the rear of each
arm.
2. Slide each arm to the desired width and tighten the
screws.
Seat Height Adjustment (Picture Not Shown)
To adjust the seat height: Lift up on seat rotate lever and turn
seat either left or right, lift seat straight up. Holding rotate lever in
the up position while lifting seat may make this task easier.
Remove 17mm machine screw and place seat post
at the desired height and re-insert screw.
Seat Rotation Lever
The seat can be rotated through 360
° and locked at any
90 ° position.
1. Pull up on the seat rotate lever and rotate the
seat to the desired position.
2. Release the handle to lock the seat at any 90 °
position.
DO NOT ATTEMPT TO DRIVE YOUR
AVENGER IN ANY SEAT POSITION OTHER THAN
FULLY FORWARD.
Flip-Up Armrests
Pull up on the end of either armrest to flip it up for easy
transfer on and off your Golden Avenger .
Seating
The Golden
seat is available only in black vinyl.