manualshive.com logo in svg

Golden Avenger GA541, Owner'S Manual

Share
Download
Golden Avenger GA541 Owner'S Manual Download Page 24

 

24 

VII. DISASSEMBLY

 

 
Step  4    -    Remove  the  battery  cover  –  This  will  give  you  access  to  the  batteries,  wire            
connections, and the main connection pin. 

 

 

 

 

 

 

 

 

 

 

 
 

 

Step 6  -  Remove safety retaining clip from the ball detent pin and pull pin out. 

 

Step 7  -  With one hand grab top of seat post, with your other hand grab curved rear frame  

                support member. Lift and separate front half from rear. 

 

AVENGER™ ASSEMBLY/DISASSEMBLY  

 

DO  NOT  SIT  ON  YOUR  AVENGER™  UNLESS  BALL  DETENT  PIN  IS    

INSERTED AND RETAINING CLIP RE- INSTALLED IN BALL DETENT PIN.

 

 

            

PINCH/CRUSH HAZARD!  

               

BE  CAREFUL  NOT  TO  PINCH  YOUR  FINGER(S)  BETWEEN  FRAME  HALVES  DURING             

RE-ASSEMBLY. 

 

 

 

Step 5, Number 1:  

Unplug the two gray  

battery connectors

. 

 

 

 

 

 

 

 

Step 5

 

- Unplug the

 

following connections (see photos on the following pages).

 

  

1.

 

Unplug the two gray battery connectors.

 

  

2.

 

Undo the two Velcro retaining straps and remove batteries.

 

  

3.

 

Unplug the large white main cable connector.

 

  

4.

 

Unplug the small white charger connector.

 

  

5.

 

Unplug the gray rear lights connector.

 

Summary of Contents for Avenger GA541










































Reviews:

No comments

Brands by name

Popular brands

Load more brands