Golden Alante GP205 Owner'S Manual Download

Page: 38 / 46

XI. TECHNICAL SPECIFICATIONS

1. Battery range will vary due to rider weight, drive surface, terrain, and battery type.

2. Electronics warranty excludes batteries.
Literature is current at the time of printing. Golden Technologies reserves the right to make changes to the product or
literature at any time.

Specification

Alanté Sport

Model Number

GP205CC

GP205SS

Medicare Code

K0823

K0822

Weight capacity

300 lbs.

Drive Wheels

Front

Maximum speed

3.5 mph

Operating Range

16.5 miles

Ground Clearance

1.75 in.

Turning Radius

25 in.

Type Batteries

2-U1

Colors

Red

Freewheel Mode

Yes

Electronic Speed Control

Yes

Electro-Mechanical Brakes

Yes

Charger

Off Board

Controller

50 Amp Remote

Length

39.5 in.

Width

22.25 in.

Height (ground to top of back of seat)

37" - 39"

41" - 43"

Height (ground to top of back of headrest)

44.5" - 48"

48.5" - 52"

Ground to top of Seat

20.5" – 22.5"

18.5" – 20.5"

Number of Seat Height Adjustments

Size of Increments

1.0 in.

Weight of Unit: (assembled)

157 lbs.

154 lbs.

Base

67 lbs.

Seat with Arms

46 lbs.

43 lbs.

Batteries

22 lbs/each

Tires:

Flat Free

Front

9 in.

Casters

6 in.

Front Anti-Tip Wheels

4 in.

Standard Seat:

Captain’s Seat

Captain’s Van/Pan

Slide Seat

Not Available Not

Available

Back Height (no headrest)

19”

23”

Back Height (with headrest)

26.5” – 30.0”

30.5” – 34.0”

Width x Depth

18” x 16”/18”

18” x 18”

Color

Gray Vinyl

Footrest:

Yes

Height Adjustable

Yes

Angle Adjustable

Yes

Warranty:

Frame

Five Years

Drive Train

13 Months

Electronics

13 Months

Batteries

12 Months 12

Months

Summary of Contents for Alante GP205















































Search results

Summary of Contents for Alante GP205

Reviews:

Related manuals for Alante GP205

Brands by name

Popular brands

Golden Alante GP205, Owner'S Manual

Search results

Summary of Contents for Alante GP205

Reviews:

Related manuals for Alante GP205

Brands by name

Popular brands