34
VIII. BATTERY CHARGING
CHARGING THE BATTERIES
Your
Alanté
‘s charging system is designed for your safety and for your convenience.
Follow the steps below to recharge the batteries.
1. Position your
Alanté
close to a standard wall electrical outlet.
2. Turn off the power on the joystick.
3. Insert the matching charger plug into the joystick’s charging socket that is located
at the front of the joystick. See Figures 29 and 30.
4. Insert the plug at the other end of the charger power cord into a standard
electrical wall outlet. (Power to the charger indicated by a red LED).
NOTE:
MAKE SURE THE STANDARD ELECTRICAL OUTLET YOU ARE USING IS
NOT CONTROLLED BY A LIGHT SWITCH CAUSING THE CHARGER TO SHUT OFF
WHEN IT IS ACTIVATED.
5. Disconnect the charger power cord from the wall outlet and from the joystick
charging socket when the batteries are fully charged.
The batteries should be fully charged in eight hours. A full charge is
indicated, when the charge LED turns green and all 10 joystick LEDs are lit when the
joystick is turned on.
Figure 29
Figure 30
