8
Operation Code
SMS Response
802 phone number#
The 2
nd
owner is xxxxxxxxxx.
Note: There should be no blank space among the words when sending SMS.
Set the Spare Phones:
Operation Code
SMS Response
803 phone number#
The 1
st
spare user is xxxxxxxxxx.
804 phone number#
The 2
nd
spare user is xxxxxxxxxx.
805 phone number#
The 3
rd
spare user is xxxxxxxxxx.
Note: There should be no blank space among the words when sending SMS.
▶
To Set A New Operation Password
Operation Code
SMS Response
808 new password#
New operation passoword is xxxxxx.
Note: There should be no blank space among the words when sending SMS.
Remark:
a. The operation password should be six digits among 0~9;
b. To ensure the safety of your car, please keep the operation password in mind and in secret.
▶
To Set Local Time Zone
Send order of “the operation code +/- the 4 numbers of the time-zone” to the main unit’s SIM card.
For example, Beijing’s time zone is GMT+08
：
00, the content of the order will be “43+0800”.
Operation Code
SMS Response
818+/-time zone#
New Time zone is GMTxx:xx
Note: There should be no blank space among the words when sending SMS.
LONG-RANGE ENGINE START METHODS
▶ ▷
Long-range Engine Start
The engine only can be started in arming mode. The driver can start the engine manually or by the system’s
automatic detection.
A. Once Engine Start by Transmitter (Transmitter Programmable)
If the car is powered by diesel, only Once Engine Start is available. It can not be started by detection.
a. In arming mode, press
for 2 sec, turn signal flash 3 times, siren chirps once and engine will is
started.
b. After the engine is started, turn signals will keep flashing for 10 sec to indicate that the engine has been
started.
c. At this moment, the driver can press
again to disable the engine and resume the system to former
status.
d. When the engine is started, the car will be detected automatically. If any door is opened at this time,
engine will be interrupted immediately. Turn signals will flash for 30 sec and siren will chirp for 30 sec
and then the system will resume to former arming mode. (When the engine is started, shock sensor will
not be detected until the engine is disabled.)
e. When the engine is started, the driver can press
to disarm and unlock.
f.
The engine will be started for 20 minutes. After 20 minutes, if the driver doesn’t disarm and unlock, siren
will chirp for 3 sec and then the engine will be disabled automatically and the system will resume to the
former arming status.
A. Start Engine By Detection (Transmitter Programmable)
a. In arming mode, press
for 2 sec, siren will chirp once and turn signals will flash 3 times, engine will
be started immediately.
b. When the engine is started, turn signal will flash for 10 sec to indicate that the engine has been started.
c. At this moment, the driver can press
again to disable the engine and resume the system to former
status.
d. When the engine is started, the car will be detected automatically. If any door is opened at this time,
engine will be interrupted immediately. Turn signals will flash for 30 sec and siren will chirp for 30 sec
