7
main unit, you just need to input the operation code plus # to control the system. If you use the
other phones including the spare phones to control, after getting through the SIM card of the
system, you need to input the operation password and the operation code together (plus #) to
control the system. The system will send a SMS response and the voice response.
Thirdly, before start to use the alarm system, the user needs to set the relevant data (explanation as follows) which is to keep
operation safe via the 1
st
supervisor phone. Pls refer to
Phone Relevant Data Setting
(P7)
.
▶ ▷
Relevant Data:
▶
the 1
st
Supervisor Phone ----
When the user gets through the device at the 1
st
time, after 5 sec, input “002#” to set the calling phone
number as 1
st
Supervisor Phone Number.
Feature 1: supreme right to operate
a)
The spare phones, new operation password and new supervisor phones must be set by the existing 1
st
supervisor phone.
b) The user can use the operation code (3 digits plus #) directly to control the system.
Feature 2: supreme right to know
a)
When any phone is used to control the system, the system will send SMS feedback to the 1
st
supervisor phone.
b)
The system will send alarms to the 1
st
supervisor phone both via SMS and CALL once the car is in danger/emergency.
Note:
for your first knowledge to the car’s status, we strongly recommend you to set your own mobile as 1
st
supervisor phone.
▶
the 2
nd
Supervisor Phone – to be set by the 1
st
Supervisor Phone
Feature 1: The user can use the operation code (3 digits plus #) directly to control the system.
Feature 2: When emergency happened, if the 1
st
Supervisor phone has no response to the alarm, the system will send
alarms to the 2
nd
supervisor phone and the spare phones. (Pls refer to the Spare Phones as below.)
▶ 3
Spare Phones ----
When the operation related to safety happened, or when the car is in danger of being damaged or stolen, the
system will send the alarms to the 1
st
supervisor phone automatically at once. But if it can not be gotten through or no one answers,
to ensure someone receives the alarm and protect the car effectively, the system will begin to call the 2
nd
supervisor phone and the
spare phones circularly for 30 minutes until any one of them is answered. There are 3 spare phones.
▶
Operation Password ----
When you need to control the system by other phones rather than 2 supervisor phones, you have to send
the operation code with the operation password to the SIM card inside the main unit. (If you use 2 supervisor phones to control the
system, you only need to send the operation code without the operation password. ) The default operation password is 123456. You
can set a new operation password by the 1
st
supervisor phone.
▶
Operation Code ----
Operation code is formed by 3 digits among 0~9. Operation code is used to control the system. Such as the
operation code 001 is used to arm the car etc. (Refer to
Phone Operation Code List
of P14-15)
▶
Time Zone Setting ---- This function is to set your locate real time into this car alarm system.
PHONE RELEVANT DATA SETTING
Notice: these data are important and only can be set by the 1
st
supervisor phone & only sending SMS to set is available.
▶
To Set A New 1
st
Supervisor Phone
After installation, when the user gets through the main unit at the 1
st
time, after 5 sec, input “002#” to set the
calling phone number as 1
st
Supervisor Phone Number. But after that, if you want to change the other phone as
the 1
st
supervisor phone, please operate as follows:
Operation Code
SMS Response
801 phone number#
The 1
st
owner is xxxxxxxxxx.
Note: There should be no blank space among the words when sending SMS.
▶
To Set The 2
nd
Supervisor Phone & 3 Spare Phones
Set the 2
nd
Supervisor Phone:
