10
“Timer engine start is off.” (Unavailable for making a CALL operation.)
Attention:
a. If this function is activated by transmitter program, each time to realize/activate timer engine start,
the user needs to keep pressing
for 2 sec
.
b.
by Phone
: If the hand brake is not pull up, any door is not closed well or the system is not in arming
mode, this operation will not be allowed and SMS feedback “The hand brake is not pull up. The
engine cannot be started”, “Invalid operation” or “Your vehicle is disarmed. The engine cannot be
started”.
▶ ▷
Once Start Button (Optional Feature)
▶
Using Guide:
a.Press the start button only, it will be ACC ON~OFF~ON~OF~ON … circularly;
b.Step on the foot brake (LED inside the button flashes) and press this button once, it will be Ignition
ON~OFF~ON~OFF…circularly. Engine start time is 0.6s/0.8s/1.0s (refer to
Operation Code List
P15).
Note:
a. if you step on the foot brake, press and hold the start button, the engine will keep being started. The
engine can be started not more than 3 sec; otherwise, the engine may be damaged.
b. if the wire of the foot brake is connected with the ACC ON, only need to keep pressing the start button
to start the engine.
c. While driving, keep pressing the start button to ACC OFF/ stop the engine. It’s no need to step on the
foot brake.
▶
Installation Guide:
a. If there is only one wire of the steering wheel lock, pls connect the two wires of the power (Red) at first, and then
connect with the lock’s wire.
b. If there is the special socket of the steering wheel lock, pls connect the pins to the socket directly. It’s no need to
connect wires.
c. When the car is installed with the start button, to use the button to start the engine successfully, the steering wheel
locks shouldn’t be locked. So the user should ask the locksmith key to copy the original car key. Pls insert the copied
key into the keyhole and turn it to the 1
st
or the 2
nd
gear, and cut it in 1mm in exposed. Pls cover the button on the
keyhole.
▶
Engine Off/ Flameout Method (Transmitter Programmable):
Refer to
Transmitter Function Program
(P4) to choose immediate or delay flameout.
a. Immediate Flameout: suggested for
automotive-gearshift car
. When step on the foot brake and keep
pressing the start button, the ignition will be off at once. (Pls make sure the gear is moved to P and the hand
brake is pull up after flameout.)
b. Delay Flameout: suggested for
manual-gearshift car
. When step on the foot brake and press the start button, siren will
chirp once. After 2 minutes, the ignition will be off. Within the 2 minutes, the user can check whether the hand brake is
pull up and the gear is stuck in neutral or not.
Notice:
▶
We strongly suggest that you should program delay flameout if your car is manual-gearshift. It helps make
sure that the hand brake is pull up and the gear is stuck in the neutral to prevent the car moving by itself when it
is started by the phone/ transmitter in long range.
▶
The user also can send operation code to the SIM card inside the main unit to select Immediate /Delay
Flameout method. (Refer to
Operation Code List
P14 operation code 124# and 125#.)
SOS BUTTON
