Golden Eagle 2610E, Instruction Manual

Page: 7 / 50

OPERATION
CAUTION
Read this complete OPERATION section and the section on SAFETY
PRECAUTIONS before starting the machine for the first time.
PREPARING THE ENGINE FOR OPERATION
1. When operating this machine for the first time, place the machine in an uncongested and well
ventilated work area in an open area away from flammable materials. Place the machine on a concrete
pad or a stable workbench.
2. Remove Fuel Tank Cap and fill the Fuel Tank with either regular or unleaded gasoline.
CAUTION
Gasoline with a minimum of 87 octane should be used. Use clean gasoline.
Dirty gasoline can promptly overload the fuel filter. Water in the gasoline can
cause unexplained stops. Very old or stale gasoline has a detrimental effect
on the rubber seals in the fuel system and causes hard starting because it
vaporizes poorly.
3 . Place the Fuel Tank Cap on the Fuel Tank and turn the cap firmly in the clockwise (CW) direction
until the stop is reached.
4. Wipe any spilled gasoline from the machine and allow time for any unseen spills to evaporate.
CAUTION
Do not put any formulation in the machine until you have become familiar with
starting and stopping the pulse jet engine.
ENGINE OPERATION
CAUTION
Read the complete OPERATION section and the section on SAFETY
PRECAUTIONS before operating the engine.
NOTE
Abbreviated starting and clearing procedures are shown on the instruction label
attached to the machine; however, these should be used as reference only after
you are thoroughly familiar with the procedures,
CAUTIONS and WARNINGS
contained in this manual.
7