Golden Eagle 2610E, Instruction Manual

Page: 14 / 50

ENCLOSED SPACE VOLUME vs FORMULATION VOLUME AND FOGGING TIME
Based on formulation label application rate of:
1 fluid ounce (oz) per 1000 cubic feet (cu.ft.)
100 milliliters (ml) per 100 cubic meters (cu.m.)
Volume of Average Flow Rate* Fogging Time
Enclosed Space to achieve "DRY" (Seconds)
Cu. Ft (Cu. meters) Fog Oz/Min (Ml/Min)
1000 (30) 5 (150) 12
2000 (60) 5 (150) 24
3000 (90) 5 (150) 36
5000 (140) 5 (150) 60
10000 (280) 5 (150) 120
20000 (560) 5 (150) 240
30000 (840) 5 (150) 360
40000 (1120) 5 (150) 480
50000 (1400) 5 (150) 600
TABLE 1
ENCLOSED SPACE VOLUME vs FORMULATION VOLUME AND FOGGING TIME
Based on formulation label application rate of:
1 fluid ounce (oz) per 3000 cubic feet (cu.ft.)
100 milliliters (ml) per 300 cubic meters (cu.m.)
Volume of Average Flow Rate* Fogging Time
Enclosed Space to achieve "DRY" (Seconds)
Cu. Ft (Cu. meters) Fog Oz/Min (Ml/Min)
1000 (30) 5 (150) 4
2000 (60) 5 (150) 8
3000 (90) 5 (150) 12
5000 (140) 5 (150) 20
10000 (280) 5 (150) 40
20000 (560) 5 (150) 80
30000 (840) 5 (150) 120
40000 (1120) 5 (150) 160
50000 (1400) 5 (150) 200
TABLE 2
*This flow rate is an average. Your actual flow rate required to produce a "dry" fog may vary depending on: the viscosity of the
formulation to be fogged, the formulation tank pressure, and the operating characteristics of the engine. A "dry" fog must be used
when fogging in an enclosed area. See "Dispensing FOG WARNING" on page 15, and "Note" on page 16. To test the fog to verify
that it is "dry," see "Caution" on page 16.
WARNING
IF YOUR FLOW RATE REQUIRED TO ACHIEVE A "DRY" FOG IS GREATER OR LESS THAN THE
AVERAGE FLOW RATE GIVEN IN TABLES 1 AND 2, FOGGING TIME FOR THE ENCLOSED SPACE
WILL BE DIFFERENT THAN THE TIME SHOWN. (SEE STEP 3 ON PREVIOUS PAGE TO DETERMINE
FOGGING TIME.)
IT SHOULD ALSO BE NOTED THAT TABLES 1 AND 2 ARE BASED ON A FLOW RATE OF 2.3 GPH (8.9
LT./HR.) OR 5 OZ./MIN, (150 ML./MIN.) "DRY-FOG" AS SHOWN.
14