Golden Eagle 2610E, Instruction Manual

Page: 13 / 50

Example: (Using English System Units)
Step 1: Let's assume the attic space shown on the previous page has a base (W) of 26 feel,
and a height (H) of 7 feet and a length (L) of 43 feel. The volume (V) may be determined as:
V = 26 x 7 x 43 = 3913 = 3900 cubic feet
2
Let's also assume that the formulation label specifies a normal usage rate of 1 ounce per
3000 cubic feet.(Table 2)
Knowing the usage rate from the formulation label and the volume of space to be fogged,
the formulation volume and fogging time can be calculated as shown below
.
FOGGING OUTDOORS: Read and follow all cautions and warnings for "Dispensing
Fog" on pages 15 and 16. Read and follow the instructions for thermal fogging on the
chemical solution label.
METERING VALVE SETTING VS. FLOW RATE:
The following graph represents an approximate cross reference between the metering valve setting
(0-10) and the formulation flow rate. This graph was derived using 467 Base oil (approximately 1
centipoise viscosity) as the formulation being fogged.
13