manualshive.com logo in svg

Goldak Goldak 2310, Operating Manual

Share
Download
Goldak Goldak 2310 Operating Manual Download Page 40

(d) Having narrowed the null to a single location under the pointer

antenna  mark that spot on the ground   Now  move away from that
spot in order to locate other spots on the ground   As you locate the
path of other null spots  you will be tracing the course of the line

Tracing by Peaks

To trace using signal peaks  set the locating mode to “PEAK”  according to the
instructions given in Chapter   Hold the receiver approximately vertical
when using PEAK mode   When PEAK mode is selected  the user will notice
the horizontal flashing arrow inside the pointer icon in the upper right hand
corner of the display   This indicates that the receiver will respond to fields in
the horizontal direction

(a) Walk around the general area of the energized line   The goal is to seek

for increasing signal response  as presented by the ANR and the arrow
shaped bar graph   As you search  it is recommended that you
occasionally rotate the pointer antenna  since the response of the
antenna is now related to its positioning

(b) As the response increases  continue walking until the response passes a

maximum and begins to decrease   You have just passed a “peak” over
the buried line   Position the 

 vertically so that the pointer is directly

over the spot where the peak is   The pointer antenna should now be
pointing directly at the buried line

(c) Next  rotate the

receiver to obtain
t h e   m a x i m u m
response over the
line   When this is
done  the receiver
will be positioned
so that the line
passes directly
beneath it from
back to front  as
shown

Summary of Contents for Goldak 2310





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands