background image

Thank  you  for  choosing  this  GOLDAIR  Electric  Slicer.  This  GOLDAIR 
appliance  has  been  designed  and  manufactured  to  high  standards  of 
engineering and with proper use and care, as described in this leaflet,  will 
give  you  years  of  useful  service.  Please  read  these  instructions  carefully 
and keep them for future reference. 
 
 

ALWAYS 

 Always ensure hands are dry before 

handling the plug or the Electric Slicer. 

 Always operate the Electric Slicer in the 

middle of a secure, dry, level surface. 

 Always allow the Electric Slicer to cool 

before cleaning and storing and before 
removing and/or cleaning its components. 

 Carry out regular checks of the supply cord 

to ensure no damage is evident.  

 Return the Electric Slicer after a malfunction, 

or if it has been damaged in any manner, to an 
authorised electrical service technician for 
examination, repair or adjustment as special 
purpose tools are required. 

 Children should be supervised to ensure 

that they do not play with the appliance. 

 Unplug from outlet while not in use and 

before cleaning. 

 Switch off the appliance and disconnect 

from supply before changing accessories or 
approaching parts that move in use. 

 Avoid contact with the moving parts. Keep 

hands, hair, clothing, as well as other utensils 
away from blade of the Electric Slicer during 
operation to reduce the risk of injury to person 
and/or damage to the Electric Slicer. 
 
 

NEVER 

 Never touch hot surfaces. 

 Never use this appliance outdoors. 

 Never use this appliance for any purpose 

other than its intended use. This appliance is 
intended for household use only or in similar 
applications such as: 

Staff kitchen areas in shops, offices and 
other working environments; 

Farm houses 

By clients in hotels, motels and other 
residential type environments; 

Bed and breakfast type environments 

 Never leave the appliance unattended when 

in use. 
 
 
 
 
 
 
 
 
 
 
 
 
 

 Never allow the power cord to overhang the 

edge of a table or bench top or to touch any hot 
surface. 

 This appliance is not intended for use by 

persons (including children) with reduced 
physical, sensory or mental capabilities or lack 
of experience and knowledge, unless they are 
supervised or have been given instruction 
concerning the use of the Electric Slicer by a 
person responsible for their safety. 

 Never place this appliance on or near a hot 

gas or electric burner or where it could touch a 
heated oven or microwave oven. Do not place 
in a hot oven. 

 Never immerse the 

Electric Slicer’s cord set 

or plug in water or any other liquid to protect 
against electrical hazards. 
 

 Never place the Electric Slicer body in a 

dishwasher. 

 Never use harsh, abrasive or caustic 

cleaners to clean this appliance. 

 Never operate the appliance with a 

damaged cord or plug, after it malfunctions, or 
if it has been damaged in any manner. Have 
the appliance checked and repaired by a 
qualified electrician if repair is necessary. If the 
supply cord is damaged, it must be replaced by 
the manufacturer, its service agent or similarly 
qualified persons in order to avoid a hazard. 

 The Electric Slicer is not intended to be 

operated by means of an external timer or 
separate remote-control system. The use of an 
extension cord is not recommended. 

 Never use metal scouring pads for cleaning. 

Small metal pieces can come loose and cause 
short-circuiting of electrical components, which 
can cause electric shock or damage the 
appliance. 

 Due to the risk of injury, the use of third 

party accessories is not recommended by the 
manufacturer.

  

 
 

 
 

 
 

 
 
 
 
 
 
 
 
 

General care and safety guide 

TECHNICAL SPECIFICATION 

Model No:    

FES150, GES150 

Power Supply:  

220 - 240VAV 50Hz  

Power:  

 

25W 

Summary of Contents for Wonder Chief FES150

















Reviews: