background image

General Care and Safety Guide 

Thank you for choosing a Goldair Select Micathermic Heater. This Goldair 
Select  Heater  has  been  designed  and  manufactured  to  high  standards  of 
engineering and with proper use and care, as described in this leaflet,  will 
give you years of useful service. Please read these instructions carefully. 

1. Use  only  the  voltage  specified  on  the  rating 

label of the appliance. 

2. Keep all objects at least 1 metre from the front, 

sides  and  rear  of  the  appliance.   Do  not  place 
appliance close to radiant heat source. 

3. Do  not  operate  in  areas  where  petrol,  paint  or 

other flammable liquids are used or stored. 

4. Do  not  insert  or  allow  foreign  objects  to  enter 

any ventilation or exhaust opening, as this may 
cause  an  electric shock,  fire  or  damage  to  the 
appliance. Do not sit on the appliance. 

5. Do not operate this appliance  with a damaged 

cord,  plug  or  after  the  appliance  malfunctions 
or  has  been  dropped  or  damaged  in  any 
manner. Return to a qualified electrical person 
for examination, electrical service or repair. 

6. This  appliance  is  intended  for  household  use 

only and not for commercial or industrial use. 

7. Use  this  appliance  only  as  described  in  this 

manual. Any other use is not recommended by 
the manufacturer and may cause fire, electrical 
shock or injury. 

8. The  common  cause  of  overheating  is  deposits 

of  dust  or  fluff  in  the  appliance.  Ensure  these 
deposits  are  removed  regularly  by  unplugging 
the  appliance  and  vacuum  cleaning  the  air 
vents and grills. 

9. Do  not  use  abrasive  cleaning  products  on  this 

appliance.  Clean  with  a  damp  cloth  (not  wet) 
rinsed in hot soapy water only. Always remove 
plug from the mains supply before cleaning. 

10. Do  not  connect  the  appliance  to  mains  supply 

until completely assembled and adjusted. 

11. Switch  off  and  use  handles  provided  when 

moving. 

12. Do  not  operate  with  cord  set  coiled  up  as  a 

heat build up is likely, which could be sufficient 
to become a hazard. 

13. The  use  of  an  extension  cord,  powerboard,  or 

external  timer  is  not  recommended  with  this 
unit  

14. Do  not  remove  plug  from  power  socket  until 

the appliance has been switched off. 

15. Do  not  remove  plug  from  power  socket  by 

pulling cord; always grip plug. 
 

 

16. Always unplug appliance when not in use. 
17. Do  not  locate  the  heater  directly  below  any 

power socket during operation. 

18. Do  not  twist, kink  or  wrap  the  cord  around  the 

appliance,  as  this  may  cause  the  insulation  to 
weaken  and  split.  Always  ensure  that  all  cord 
has been removed from any cord storage area 
and is unrolled before use. 

19. This  appliance  is  not  intended  for  use  by 

persons  (including  children)  with  reduced 
physical, sensory or mental capabilities or lack 
of  experience  and  knowledge,  unless  they  are 
supervised  or  have  been  given  instruction 
concerning  the  use  of  the  appliance  by  a 
person responsible for their safety. 

20. Do  not  use  this  appliance  in  the  immediate 

surrounds  of  a  bath,  a  shower,  or  a  swimming 
pool  or  other  liquids.  The  appliance  must  not 
be immersed in any liquids. 

21. When  the  appliance  has  been  unpacked, 

check  it  for  transport  damage  and  ensure  all 
parts have been delivered. If parts are missing 
or  the  appliance  has  been  damaged,  contact 
the  Goldair  Select  Customer  Services  Team. 
(refer to details on back page) 

22. If  your  appliance  does  not  work,  or  is  not 

working  properly,  contact  the  place  of 
purchase  or  the  Goldair  Select  Customer 
Services Team. (refer to details on back page). 
Repair  work  on  the  appliance  by  unqualified 
persons can cause serious risk to the user. 

23. There are no user serviceable parts installed in 

the unit. 

24. Do  not  place  the  unit  in  wardrobes  or  other 

enclosed  spaces  as  this  may  cause  fire 
hazards. 

25. This  unit  is  not  supposed  to  be  used  in  or 

around locations where foodstuffs, works of art 
or delicate articles of science, etc are stored. 

26. Indoor use only. 
27. Children  should  be  supervised  to  ensure  that 

they do not play with the appliance. 

28. Ensure  heater  is  on  a  flat,  stable,  heat-

resistant surface. 

Summary of Contents for Select GSMH100









Reviews: