Goldair Select GSMH100, Operating Instructions Manual

Page: 5 / 8

WALL-MOUNT FITTING; TO USE AS A FIXED UNIT
Fitting accessories should be mounted on the wall by screws provided. They should be a
distance of 100-150 mm away from the floor. It is important to mount the heater horizontally.
Wall mounting assembly method:
Slide the brackets provided into the Micathermic heater.
Measure the distance between the bottom of the unit and each bracket hole on either side of
the unit.
Add 100-150mm to the measurement from the ground to allow distance from the floor.
Measure the distance from left to right of each bracket hole (estimated distance 330mm) and
drill holes in wall meeting these measurements.
Press the plastic expanded screws into holes and then fixing the brackets on the wall by
screwing them into the holes.
CAUTION: never install the heater directly beneath a socket-outlet or in such a way that
people in the baths, showers or pools may have to touch live parts such as a switch.
Important: The heater must be connected to an earthed outlet of the appropriate voltage.
Measure Width
Measure Height, Add 150mm
Overview of your Micathermic Heater
TECHNICAL SPECIFICATION
Model No: GSMH100
Power Supply: 220-240V, 50Hz AC only
Power: 1800W