HAND WASHING
For blankets with fixed controllers, the controller or switch must not be allowed to
get wet during washing.
Fold and presoak the Electric Blanket for 15 minutes in a mild soap and lukewarm
water solution.
Ensure the water temperature is less than 30°C.
Gently squeeze the soap suds through for a few minutes.
Rinse in fresh lukewarm water.
AIR DRYING
Gently stretch the Electric Blanket to its original size.
Air dry over a clothes line or shower rod.
DO NOT
use clothes pegs or clips of any kind.
For blankets with fixed controllers, ensure the cord is positioned so that water cannot
flow into the controller or switch.
DO NOT
use the Electric Blanket until it is completely dry.
MACHINE WASHING (BLANKETS WITH DETACHABLE CONTROLLERS ONLY)
Unplug and remove the Electric Blanket controls.
Fold and presoak the Electric Blanket for 15 minutes in a mild soap and lukewarm
water solution. Ensure the water temperature is less than 30°C.
Wash in mild soap and lukewarm water on the delicate or gentle cycle for 2 minutes.
Rinse in fresh lukewarm water.
MACHINE DRY (BLANKETS WITH DETACHABLE CONTROLLERS ONLY)
Place the blanket into the dryer and tumble dry on low setting until damp. Approx 30
minutes.
Remove the blanket while it is still damp and gently stretch to its original size.
Continue to air dry over a clothes line or shower rod. (DO NOT use clothes pegs or
clips of any kind).
DO NOT USE IF MOIST OR WET
Care and Cleaning of your Goldair Electric Blanket
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
SUPPORT AND TECHNICAL ADVICE
Goldair
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
TECHNICAL SPECIFICATION
Supply:
230-240VAC 50HZ
Model:
GSFL-DQ
GSFL-K
Wattage:
2 x 70-80W
2 x 60-70W
