![background image](http://html.mh-extra.com/html/goldair/select-gsfl-series/select-gsfl-series_operating-instructions-manual_2239839005.webp)
FITTING YOUR GOLDAIR FITTED ELECTRIC BLANKET
Place the Electric Blanket on the mattress with the skirt on top of the Electric Blanket.
Ensure the end of the Electric Blanket with controls is at the top end of the bed.
The power cord must be positioned to prevent it being sat on or rolled on when
getting in or out of the bed. If the controller cord is sat on or trapped between the bed
edge and the user on a regular basis it will be damaged over time resulting in
premature failure or fire.
Cord must not be bent over the edge of the bed.
Once the Electric Blanket is in the correct position fit the skirt over the mattress.
Connect the Electric Blanket controls into the sockets on the Electric Blanket and plug
into a power point and turn on. The controller must be kept outside the bed and away
from external heating sources, such as heaters or bedside lamps..
Fitting your Goldair Electric Blanket