Operating Your Oil Column Heater
TIMER
You must set the time prior to programming the
Timer. To do this; turn the outer dial of the timer
in a clockwise direction until the time of the day
(24-hour clock) corresponds with the triangular
marking.
Example if it is 2pm (1400 hours) then set the
triangular mark in line with 14. One complete turn
of the dial corresponds to 24 hours.
There are 96
“riders”, positioned around the dial,
each rider represents 15 minutes.
Where all the
“riders” are pushed to the outside of
the timer the heater will be ON continuously.
To set a specific time for example:
If you want the heater to be on from 6pm to
10pm, then set all the riders from 18 to 22 (1800
hours to 2200 hours) to the outside of the rim and
all other riders to the inside of the timer. The unit
will then turn on automatically at 6pm and off
again at 10pm.
Riders pushed to the
outside rim to turn ON
WARNING! Take care in positioning your heater,
using the timer will mean the heater will come on
automatically. Fire may result if placed next to
combustible material.
Indicates actual time
Goldair Select
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair Select
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
