Main Body x1
Wing Nut x2
U-shape Bolt x2
Wheel Castor x2
Components
Of Your Heater
ASSEMBLY
Carefully turn the Main Body upside-down on a
scratch-free and stable surface. Be careful to
prevent damage to the paint finish or your floor
surfacing (Fig.1).
Fit the wheel assemblies onto the Main Body by
placing the U-shaped bolts between the outermost
fins on each side of the Main Body (see Fig.2 - 4).
Securely fasten the wheel assemblies onto the
Main Body by screwing the wing nuts onto the U-
shaped bolts (see Fig. 5).
IMPORTANT: Please fit the wheel assemblies as
per the diagram. Any other position may affect the
stability of the heater.
WARNING: Operate the heater in normal upright
position only with wheel assemblies attached to the
bottom. Any other position could create a
hazardous situation.
