General Care And Safety Guide
Thank you for choosing a Goldair Select Oil Heater. This Goldair Select
Heater has been designed and manufactured to high standards of
engineering and with proper use and care, as described in this leaflet, will
give you years of useful service. Please read these instructions carefully.
TECHNICAL SPECIFICATION
Model No:
GSOC125
Supply:
220-240VAC 50Hz
Wattage:
1000W
Model No:
GSOC129T
Supply:
220-240VAC 50Hz
Wattage:
2000W
Model No:
GSOC1211T
Supply:
230-240VAC 50Hz
Wattage:
2300-2400W
1.
Use only the voltage specified on the rating label
of the appliance.
2.
Keep all objects at least 1 metre from the front,
sides and rear of the appliance. Do not place
appliance close to radiant heat source.
3.
Do not operate in areas where petrol, paint or
other flammable liquids are used or stored.
4.
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening, as this may cause
an electric shock, fire or damage to the
appliance. Do not sit on the appliance.
5.
Do not operate this appliance with a damaged
cord, plug or after the appliance malfunctions or
has been dropped or damaged in any manner.
Return to a qualified electrical person for
examination, electrical service or repair.
6.
This appliance is intended for household use
only and not for commercial or industrial use.
7.
Use this appliance only as described in this
manual. Any other use is not recommended by
the manufacturer and may cause fire, electrical
shock or injury.
8.
The common cause of overheating is deposits of
dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging
the appliance and vacuum cleaning the air vents
and grills.
9.
Do not use abrasive cleaning products on this
appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove
plug from the mains supply before cleaning.
10.
Do not connect the appliance to mains supply
until completely assembled and adjusted.
11.
Switch off and use handles provided when
moving.
12.
Do not operate with cord set coiled up as a heat
build up is likely, which could be sufficient to
become a hazard.
13.
Do not use an extension cord, powerboard, or
external timer with this unit.
14.
Do not remove plug from power socket until the
appliance has been switched off.
15.
Do not remove plug from power socket by pulling
cord; always grip plug.
16.
Always unplug appliance when not in use.
17.
Do not locate the heater directly below any
power socket during operation.
18.
Do not twist, kink or wrap the cord around the
appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord has
been removed from any cord storage area and is
unrolled before use.
19.
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the appliance by a person
responsible for their safety.
20.
Do not use this appliance in the immediate
surrounds of a bath, a shower, or a swimming
pool or other liquids. The appliance must not be
immersed in any liquids.
21.
When the appliance has been unpacked, check if
for transport damage and ensure all parts have
been delivered. If parts are missing or the
appliance has been damaged, contact the
Goldair Select Customer Services Team.
22.
If your appliance does not work, or is not working
properly, contact the place of purchase or the
Goldair Select Customer Services Team. Repair
work on the appliance by unqualified persons
can cause serious risk to the user.
23.
There are no user serviceable parts installed in
the unit.
24.
Do not place the unit in wardrobes or other
enclosed spaces as this may cause fire hazards.
25.
This unit is not supposed to be used in or around
locations where foodstuffs, works of art or
delicate articles of science, etc are stored.
26.
Indoor use only.
27.
Children should be supervised to ensure that
they do not play with the appliance.
28.
Ensure heater is on a flat, stable, heat-resistant
surface.
29. It is important that you do not cover this
heater.