Operating your Ceramic Heater
SAFETY DEVICE
This appliance has three protection devices:
The first device will automatically turn the appliance
off if the appliance is not in the appropriate operating
position. The second device automatically
disconnects & reconnects the appliance at a pre-set
temperature. The third device disconnects the
appliance permanently in case of overheating, by
means of a thermal fuse (it is non resettable).
IMPORTANT! NEVER COVER THIS HEATER!
Do not use this heater with a programmer, timer,
separate remote-control system or any other device
that switches the heater on automatically.
CARE AND CLEANING
The heater requires regular cleaning to ensure trouble
free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool down
completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the
heater to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff from
around the grills.
Ensure the heater is dry before plugging back into the
mains supply.
Do not attempt to dismantle the heater. There are no
user serviceable parts. For service or repair, contact
an authorised electrical service technician.
WARNING Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
HEAT CONTROL SWITCH
The control switch positions are:
“0” = OFF
= Fan
“I” = Low Heat
“II” = High Heat
Check that the Heat Control Switch is set to Off
position before plugging the heater into the mains
supply.
Switching the heater to Fan Only will operate the
heater without the elements heating.
For greater economy, use the High Heat setting
initially and then switch to the Low Heat setting.
For the Low and High Heat settings the fan remains
at the same speed; only the element changes to
create greater/lesser heat output.
THERMOSTAT
Turn the thermostat knob clockwise until you reach
the maximum temperature on the graduated scale.
When the desired room temperature is reached,
slowly turn the knob anti-clockwise until the heater
turns off (you will hear a click). The heater will now
cycle on and off to maintain the set temperature.
OSCILLATION
Press the button between the two dial control knobs
to turn the heater oscillation function On and Off.
CAUTION: The heater generates heat during use.
Proper precautions must be taken to prevent the risk
of burns, scalds, fires or other damage to persons.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. (Refer to back of booklet).
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
Goldair Select
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair Select
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
