background image

Thank you for purchasing this Goldair product.  Your product is warranted against faults and manufacture when used in 
normal  domestic  use  for  a  period  of 

two  years. 

 

In  non-domestic  use  Goldair  limits  the  voluntary  warranty  to 

three 

months. 

 
Goldair  undertake  to  repair  or  replace  this  product  at  no  charge  if  found  to  be  defective  due  to  a  manufacturing  fault 
during the warranty  period.  
 
This warranty  excludes damage caused by  misuse,  neglect, shipping  accident, incorrect installation, or  work carried out 
by anyone other than a qualified electrical service technician. 
 
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY. 
 
The  benefits  given  to  you  by  this  warranty  are  in  addition  to  other  rights  and  remedies  available  to  you  under  law  in 
relation to the goods or services to which this warranty  relates.  
 
In  Australia,  our  goods  come  with  guarantees  that  cannot  be  excluded  under  the  Australian  Consumer  Law.  You  are 
entitled  to  a  replacement  or  refund  for  a  major  failure  and  compensation  for  any  other  reasonably  foreseeable  loss  or 
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the 
failure does not amount to a major failure.  
 
In New Zealand this warranty  is additional to the conditions and guarantees of the Consumers Guarantee Act (1993). 

Two Year Warranty 

Goldair Two Year Warranty 

(IMPORTANT: Please complete and retain this warranty card) 

Name 

 

 

Address 

 

 

 

 

 

Place Of Purchase 

Date of Purchase 

 

Name Of Product  

Model Number 

 

Attach a copy of the purchase receipt  to this warranty  card 

Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product. 

Goldair – New Zealand 

CDB Goldair 
PO Box 100-707 
N.S.M.C 
Auckland 

 

Phone +64 (0)9 917 4000 
Phone 0800 232 633 

www.goldair.co.nz

  

 

Goldair – Australia 

CDB Goldair Australia Pty 

PO Box 574 

South Morang 

Victoria, 3752 

 

Phone +61 (0)3 9336 4423 

Phone 1300 GOLDAIR  (1300 465 324) 

www.goldair.com.au

  

Summary of Contents for GPH110













Reviews: