Operating Your Oil Column Heater
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable appliance.
This heater is filled with a precise quantity of
special oil. Repairs requiring opening of the oil
container
are
only
to
be
made
by
the
manufacturer or his service agent who should
be contacted if there is an oil leak.
When
scrapping
the
heater,
follow
the
regulations concerning disposal of oil.
CARE AND CLEANING
The heater requires regular cleaning to ensure
trouble free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the heater to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff
from around the grills and fins.
Ensure the heater is dry before plugging back into
the mains supply.
Do not attempt to dismantle the heater. There are
no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
CAUTION: The heater generates heat during use.
Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to
persons.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase.
WARNING Keep all objects at least 1 metre
from the front, sides and rear of the appliance.
WARNING: In order to avoid overheating, do
not cover the heater.
WARNING: Never leave this heater
unattended.
WARNING: Do not use this heater with a
programmer, separate timer, remote-control
system or any other device that switches the
heater on automatically.
HEAT CONTROL SWITCH
The control switch positions are:
●
Minimum heating
●●
Medium heating
●●●
Maximum heating
Check that the heat control switch is set to Off
position before plugging the heater into the mains
supply. For greater economy, use the High Heat
setting initially and then switch to the Lower Heat
settings.
SAFETY DEVICE
This appliance has three protection devices:
The
first
device
will
automatically
turn
the
appliance off if the appliance is not in the
appropriate operating position.
The second device automatically disconnects &
reconnects power to the appliance at a pre-set
temperature.
The
third
device
disconnects
the
appliance
permanently in case of overheating, power spike
or product damage, by means of a thermal fuse (It
is non resettable).
SUPPORT AND TECHNICAL ADVICE
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
TECHNICAL SPECIFICATION
Model No: GOC177C.B,R
Supply: 220-240VAC 50Hz
Wattage: 1500W