Carefully turn the Main Body upside-down
on a scratch-free and stable surface. Be
careful to prevent damage to the paint
finish or your floor surfacing (Fig.1).
Fit the wheel assemblies onto the Main
Body
by
placing
the
U-shaped
bolts
between the outermost fins on each side of
the Main Body (see Fig.2 - 4).
Securely fasten the wheel assemblies onto
the Main Body by screwing the wing nuts
onto the U-shaped bolts (see Fig. 5).
IMPORTANT:
Please
fit
the
wheel
assemblies as per the diagram. Any other
position may affect the stability of the
heater.
WARNING:
Operate the Main Body in
normal upright position only with wheel
assemblies attached to the bottom, any
other position could create a hazardous
situation.
Wing Nut x2
U-shape Bolt x2
Wheel Castor x2
Assembling GOC177
Main Body x1