![background image](http://html.mh-extra.com/html/goldair/gir500/gir500_operating-instructions-manual_2239945010.webp)
Operating Your Heater
SLEEP MODE
1.
Press MODE to enter Sleep mode.
2.
The Sleep mode indicator
will light up and the heater will start working in that mode.
SET OPERATION DURATION
The Operation Duration function is only available in Normal and Sleep Mode. This function
allows you to choose when you want the heater to turn off.
1.
When in Normal or Sleep Mode, press the SETTING button.
2.
When the time indicator light begins to flicker, you can press the plus (+) and minus (-)
buttons to adjust the time that heater will work between 1-15 hours. Time is adjusted in 1
hour increments.
3.
The heater will begin operating at your set temperature after 5 seconds or immediately
after you press the SETTING Button again.
4.
When the countdown finishes, the heater will stop working and return to standby mode.
POWER SAVING MODE
In power saving mode, you can set the temperature and weekly timer.
1.
Press MODE to enter Power Saving mode.
2.
The Power Saving mode indicator
will light up and the heater will start working.
3.
You can press the plus (+) and minus (-) buttons to adjust the temperature between 15
°
C
to 32
°
C. The display will show the temperature that it is set.
4.
The heater will begin operating at your set temperature (at full power with all 4 tubes) after
5 seconds or immediately after you press the SETTING Button again.
Note: When the temperature is set higher than the actual room temperature, the heater will
work at full power with all four tubes lit. When the temperature is set lower than the actual
room temperature, the heater will work at half power with only two tubes lit.
Summary of Contents for GIR500
Page 1: ......
Page 2: ...This page is intentionally blank ...
Page 15: ...This page is intentionally blank ...
Page 16: ......