WALL MOUNTED
1.
Make sure the appliance is unplugged and power
switches are off.
2.
Position the panel appliance within one metre of
a wall socket. Do not mount in front of or below
the wall socket. Ensure there is at least 100mm
clearance on all sides of the appliance.
3.
Assemble the bracket with the screws provided
–
see image 1.
4.
Position the mounting screws on the wall per
below mounting guide and check they are
horizontal with a spirit level. Ensure the bottom
of the heater is at least 100mm from the floor
and drill holes as required. Fix the bracket to the
wall.
5.
Slot the back of the appliance onto the mounting
screws. The bottom mount is on there to keep
the heater at the correct distance from the wall.
You do not need to put a screw in the bottom
mount.
6.
Plug appliance into a standard 240 volt AC
electrical outlet.
Assembly and Installation
Before using this appliance, it must either be wall mounted or have the feet fitted.
The screw pack to attach the feet to your appliance will be taped to either one of the
feet for your appliance, or taped to the plug.
NOTE: Your Goldair Panel Heater should be installed with at least 100mm clearance from the
floor and any other surrounding parts including other appliances, side walls and soft
furnishings. There must be at least 1m clearance from the top of the heater to ceilings or
shelves.
Note: Do not run the power cord behind the heater.
WALL MOUNTED HEATERS ARE ONLY TO BE MOUNTED ON WALLS THAT
COMPLY WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING REGULATIONS