General Care and Safety Guide
TECHNICAL SPECIFICATION
Model No: GECO200 (PH-ET200), GECO201 (PH-ET201)
Supply:
220-240VAC 50Hz
Wattage:
425W
Thank you for choosing a Goldair Ecosave Panel Heater. This Goldair
Ecosave heater has been designed and manufactured to high standards of
engineering and with proper use and care, as described in this leaflet, will
give you years of useful service. Please read these instructions carefully.
1.
Use only the voltage specified on the rating
label of the appliance.
2.
Keep all objects at least 1 metre from the front
and sides of the appliance. Do not place
appliance close to radiant heat source.
3.
Do not operate in areas where petrol, paint or
other flammable liquids are used or stored.
4.
Do not insert or allow foreign objects to enter
any ventilation or exhaust opening, as this
may cause an electric shock, fire or damage to
the appliance. Do not sit on the appliance.
5.
Do not operate this appliance with a damaged
cord, plug or after the appliance malfunctions
or has been dropped or damaged in any
manner. Return to a qualified electrical person
for examination, electrical service or repair.
6.
This appliance is intended for household use
only and not for commercial or industrial use.
7.
Use this appliance only as described in this
manual. Any other use is not recommended by
the manufacturer and may cause fire,
electrical shock or injury.
8.
The common cause of overheating is deposits
of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging
the appliance and vacuum cleaning the air
vents and grills.
9.
Do not use abrasive cleaning products on this
appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove
plug from the mains supply before cleaning.
10.
Do not connect the appliance to mains supply
until completely assembled and adjusted.
11.
Switch off when moving.
12.
Do not operate with cord set coiled up as a
heat build up is likely, which could be sufficient
to become a hazard.
13.
It is recommended that this heater is plugged
directly into the wall socket. Power boards are
not rated to supply power to high wattage
appliances.
14.
A correctly specified, undamaged extension
cord may be used with this heater provided it
is used in a safe manner.
15.
Do not remove plug from power socket until
the appliance has been switched off.
16.
Do not remove plug from power socket by
pulling cord; always grip plug.
17.
Always unplug appliance when not in use.
18.
Do not locate the heater directly below any
power socket during operation.
19.
Do not twist, kink or wrap the cord around the
appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord
has been removed from any cord storage area
and is unrolled before use.
20.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the appliance by a person
responsible for their safety.
21.
Do not use this appliance in the immediate
surrounds of a bath, a shower, or a swimming
pool or other liquids. The appliance must not be
immersed in any liquids.
22.
When the appliance has been unpacked, check
if for transport damage and ensure all parts have
been delivered. If parts are missing or the
appliance has been damaged, contact the
Goldair Customer Services Team.
23.
If your appliance does not work, or is not
working properly, contact the place of purchase
or the Goldair Customer Services Team. Repair
work on the appliance by unqualified persons
can cause serious risk to the user.
24.
There are no user serviceable parts installed in
the unit.
25.
Do not place the unit in wardrobes or other
enclosed spaces as this may cause fire hazards.
26.
This unit is not supposed to be used in or around
locations where foodstuffs, works of art or
delicate articles of science, etc are stored.
27.
Indoor use only.
28.
Children should be supervised to ensure that
they do not play with the appliance.
29.
Ensure heater is on a flat, stable, heat-resistant
surface.
30.
It is important that you do not cover this heater.
Summary of Contents for GECO200 Ecosave
Page 1: ...GECO200 GECO201...
