Goldair GCT325, Operating Instructions Manual

Page: 6 / 12

Operating Your Heater
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. Please
follow the below instructions.
WARNING:
In order to avoid overheating or fire, do not cover the heater.
WARNING:
Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
WARNING:
Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:
Never leave this heater unattended when in use.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet and switch on.
CAUTION:
Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket and could result in fire.
High Heat
Low Heat
ECO Timer
Power
ON/OFF HEAT
ADJUST UP/DOWN
TIMER
OSCILLATION