Goldair GCT325, Operating Instructions Manual

Page: 7 / 12

THERMOSTAT
Touch the up or down arrow buttons to adjust the temperature to your desired comfort setting
from 15 to 30 degrees Celsius. After the temperature is set, the display will show room
temperature.
When the room temperature reaches the preset temperature, the heating function will turn off
automatically. When the room temperature is lower than preset temperature, the low or high
heating will turn on automatically.
TIMER
This heater is equipped with a 12 hours timer. This enables you to preset the appliance to switch
on/off automatically from 1 to 12 hours in 1h increments. Press the timer button repeatedly to
set the timer.
OSCILLATION BUTTON
This button turns the heater oscillation function on and off.
Operating Your Heater
HEATER CONTROL PANEL
ON/OFF BUTTON
This button will turn the heater control panel on..
To turn the unit off, press the On/Off button on the control panel again.
HEAT SETTING BUTTON
Pressing the button lets you select the heat mode (High, Low or ECO).
High (2000W) Low (1000W)
ECO (The temperature is pre-set to 20 degrees and cannot be adjusted)