![background image](http://html1.mh-extra.com/html/goldair/gct260/gct260_operating-instructions-manual_2240166004.webp)
Operating your Ceramic Heater
SAFETY DEVICE
This appliance has three protection devices:
The first device will automatically turn the appliance
off if the appliance is not in the appropriate
operating position.
The second device automatically disconnects &
reconnects power to the appliance at a pre-set
temperature.
The third device disconnects the appliance
permanently in case of overheating, power spike or
product damage, by means of a thermal fuse (It is
non resettable).
CAUTION: The heater generates heat during use.
Proper precautions must be taken to prevent the risk
of burns, scalds, fires or other damage to persons.
Do not attempt to dismantle the heater. There are no
user serviceable parts. For service or repair, contact
an authorised electrical service technician.
CARE AND CLEANING
The heater requires regular cleaning to ensure
trouble free operation.
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the heater to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff from
around the grills.
Ensure the heater is dry before plugging back into
the mains supply.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. (Refer to back of booklet).
WARNING: Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
WARNING: In order to avoid overheating, do not
cover the heater.
WARNING: Never leave this heater unattended.
WARNING: Do not use this heater with a separate
programmer, timer, remote-control system or any
other device that turns the unit on automatically.
HEAT CONTROL SWITCHES
Check that the heat control switch is set to Off position
before plugging the heater into the mains supply. For
greater economy, use the High Heat setting initially and
then switch to the Low Heat setting.
The control switches are:
ON/OFF
2 x LOW Button
OSC Oscillation
For Low heat press either of the LOW buttons.
For High heat press both of the LOW buttons.
For the Low and High Heat settings the fan remains at
the same speed, only the element changes to create the
greater/lesser heat output.
OPERATING YOUR HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324