COMPONENTS
OPERATING YOUR CAN OPENER
NOTE: Never modify this appliance or use attachments that are not supplied in the
box.
Place the Can Opener on a flat, dry and level surface.
NOTE: Do not use the Can Opener continuously for more than 4 minutes
1. Attach the blade bracket to the can opener unit. Ensure the keys tabs align with the
key slots, push in and fix together.
2. Lift the blade bracket, tip the can so that its rim is under the locating post, the lid of the
can will be sucked by magnet, then press down the right side of blade bracket, making
sure the blade is inside the rim, drive wheel will actuate the can to rotate and the blade
will cut the can open. Because of the hands-free feature, it is not necessary to hold
blade bracket down or support the can during cutting. However, you may have to hold
the housing of can opener when cutting very tall or heavy cans.
3. When the can is opened, the can opener will stop automatically, to remove the can,
hold it with one hand and raise the blade bracket with the other.
4. You may place excess length of the cord into the back of the unit and feed the cord
through the notch for storage.
5. Carefully remove the lid from the magnet and discard.
CAUTION: Avoid contact with the cut edges of the can or lids as they are sharp.
Blade
Bottle Opener
Drive Wheel
Locating Post
Magnet
Blade Bracket
Knife Sharpener
