v
v
10
12
11
Components
Firstly, remove the wing screws (4) from
the motor housing. Fit the rear grill (5) onto
the motor shaft (6). Make sure the holes on
the motor match up with the holes on the
grill. Fit the wing screws (4) and secure
tightly.
Put the blade (2) onto the motor shaft (6)
and carefully tighten the blade screw (3).
Fit the front grill (1) onto the rear grill (5)
and fix them together using the fan grill
ring. Tighten the small screw at the bottom
of the grill.
Extend the legs of the tripod base (11) and
stand upright. Place the motor housing
onto the base (11) by pushing the top of
the pole into the neck (9). Fasten screws
provided tightly.
1.Front Grill
2.Blade
3.Blade Screw
4.Wing Screws
5.Rear Grill
6.Motor Shaft
7.Speed Control
8.Oscillation Pin
9.Neck
10. Height Adjustment Knob
11.Tripod Base
12.Rubber Feet
Assembly
