WARNING Keep all objects at least 1
metre from the front, sides and rear of
the appliance
Fan control switch
The control switch positions are:
•
0 = OFF
•
1 = Low Speed
•
2 = Medium Speed
•
3 = High Speed
Check that the fan control switch is set to
the off position before plugging into the
mains supply.
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket,
making sure the speed control is at off
position.
To operate the fan, turn the speed control
to the desired setting.
To activate the oscillation function, push
down the oscillation pin on the top of the
motor. The fan will then oscillate until the
pin is pulled back up.
To adjust the height of the fan, loosen the
height adjustment knob and raise/lower the
pole to the desired height. Secure by
tightening the knob.
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable
appliance.
Operating your Fan
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Cleaning and Maintenance
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the fan.
Use only a soft, damp cloth to gently wipe
the fan and dry well.
Do not immerse the fan in water and never
allow water to enter the motor housing.
Do not use harsh chemicals to clean the
fan.
