![background image](http://html1.mh-extra.com/html/goldair/gbqc100/gbqc100_operating-instructions-manual_2240107011.webp)
Assembly Procedure
Note: Tools required for assembly - 2 x adjustable spanners, Medium Philips
screwdriver
.
Step 2.
Fit the bottom shelf between the leg assemblies.
The large hole in the shelf should lie towards the wheel legs.
The shelf is fitted to the assemblies using 4pcs M6 x 30 screws and 4pcs M6 flange nuts (2pcs each
side)
Step 1.
On the left leg panel assembly, (this one has the larger holes and no rubber feet) attach the wheels
using axle bolt and nuts. Knock out the hub caps, attach the wheels using axle bolt and nuts, then
put back the hub caps.
Page 10