![background image](http://html.mh-extra.com/html/goldair/gbb325/gbb325_operating-instructions-manual_2239870005.webp)
1.
Before first use, clean the measuring cup,
cover and jug.
2.
Fit the blender glass jar onto the main
body, and turn it slightly in a clockwise
direction so it locks into the jug holder on
top of the housing.
3.
Place items to be blended into the jug.
Ensure the contents will not overflow from
the jug. Maximum liquid capacity is1.5L.
DO NOT USE THE BLENDER WITHOUT
INGREDIENTS IN THE JUG.
4.
Put the lid on top of the jug and push it
down. Insert the measuring cap into the
cover and turn till it locks into place.
5.
Turn the dial to position 0 in order to make
sure the unit is turned off.
6.
Plug the blender into the wall socket and
turn on.
7.
This unit has a safety mechanism and
does not work if the jug is not installed
properly seated on housing.
8.
Turn the dial to required speed
•
0 = off
•
P = pulse
– suitable for ice
crushing
•
1 = low
•
2 = high
9.
While the blender is working, a blue light
will show around the dial.
10.
Turn the dial back to ‘0’ when finished
blending.
Operating your Blender
Tips for use
When mixing hot liquids/foods excess
pressure may build up inside the blender.
This can cause the lid to come off and the
contents to splash out. We recommend
that you avoid mixing excessively hot foods
and that you put only very small quantities
of hot liquids or foods into the blender.
Do not use the blender for very hard food
products, such as bones, shelled nuts,
frozen meats etc., which could either
damage the blade or cause the motor to
seize.
Do not use the Blender continuously for
more than 1 minute.
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
IMPORTANT NOTES: When you use the blender, make sure the jug is in
position otherwise the unit will not operate.
We recommend that during blending, you stop the unit and redistribute
contents of jug. This will help to avoid clumping.
This appliance should be operated for 1 minute at a time. Allow it to cool
down before using again.
DO NOT TURN ON THE BLENDER THEN WALK AWAY; THIS IS LIKELY TO
RESULT IN THE BLENDER BEING RUN FOR TOO LONG AND THE MOTOR
MAY THEN OVERHEAT.