Assembly instructions, continued
5.
Attach Accessory
–
Place flat mixing
paddle, wire whisk or dough hook into
the accessory power port. Turn
counterclockwise until it locks. Turn
clockwise to remove. (Fig.6 & Fig.7)
6.
Lower Mixer Head
–
Pull up the small
knob again and fully lower the mixer
head. (Fig.8)
Note:
You do not need to remove the bowl
cover
pouring
chute
to
change
accessories.
Operating your Stand Mixer
To Turn Stand Mixer On
Turn dial to desired speed
We recommend:
1 to 4 for kneading
4 to 7 for mixing
7 to 9 and Max for whipping.
To Turn Stand Mixer Off
Turn switch to “OFF” position.
Ensure your Stand Mixer is turned off and
unplugged before removing or inserting
beater or whisk accessories.
NOTE:
The maximum capacity of the
FMX300/FMX310 Stand Mixer is 800gm
of mix. Overloading will compromise
performance and may damage the
motor.
This machine has a protective feature
that ensures it stops after 10 minutes
continuous running.
In addition, DO NOT operate the Stand
Mixer continuously for more than 3
minutes if you have a heavy load in the
bowl.
