SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
Care and cleaning
After sales service
This appliance is built to a very high standard.
There are no user-serviceable parts.
Follow these steps if the unit fails to operate:
1.
Check instructions have been followed
correctly.
2.
Check mains supply is functional.
3.
If the appliance will not operate, contact
the Support and Technical Advice Team
before returning it to the retail outlet you
purchased it from.
PLEASE NOTE: Light bulbs are not
covered under the warranty for this
product
.
THIS APPLIANCE IS INTENDED
FOR HOUSEHOLD USE ONLY. THE
WARRANTY DOES NOT COVER
COMMERCIAL USE.
After use, set timer knob counter
counterclockwise to “0” position.
Allow the appliance to cool completely
before cleaning. Unplug cord from the
socket.
Remove the plug from the power socket.
Cool the oven down to the room
temperature.
Remove all accessories from inside the
oven.
The wire rack and baking tray may be
washed as other kitchenware, either by
hand or by dishwasher.
You can always use a moist sponge to
clean the outside surfaces. Avoid using
abrasive products that could damage the
finish. Ensure water or soap does not
penetrate the oven inside through the
vents of the oven.
Clean the oven surface and interior with
a damp cloth or a sponge and take the
tray, rack out to wash.
Aluminum interior. Never use aluminum-
corrosive products (spray detergents) to
clean the inside aluminum walls and
never scrape the walls with sharp or
pointed objects.
Non-sticking coating interior. The Walls
on the inside of the oven feature a non-
sticking coating for easy cleaning. To
clean any spattering that may occur
while cooking, wipe the walls with a soft,
damp sponge. A non-abrasive liquid
cleanser or mild spray solution may be
used to avoid build-up of stains. Apply
the cleanser to the sponge, not the oven
surface, before cleaning.
Warning: ON NO ACCOUNT should
water be allowed to get inside the
oven!
