Operating your Food Processor
CONTROL PANEL
PULSE
Pulse button must be held for unit to
operate. When released, unit will stop. Use
Pulse for short processing tasks, such as
chopping nuts, raw meats, or vegetables.
This allows you to check processed results
and control the fineness.
1 to 5 (Speeds)
When these functions are selected, unit
runs continuously until the dial is turned
back to 0 position.
To make the processor work more slowly,
select a lower number. To make the
processor work more quickly, select a
higher number.
0 (Off)
Processor should always be left in 0
position when unit is not in use.
TO USE ‘S’ BLADES (IN MAIN BOWL)
When using „S‟ blades, to ensure the long
life of your food processor DO NOT use it
continuously for more than 30 seconds at a
time. Cool for at least 1 minute between
uses and for longer after 3 cycles.
The
„S‟ blades are versatile attachments.
The length of the processing time will
determine the texture achieved, which can
alter quickly. For coarser textures use the
pulse control for more control.
Use the
„S‟ blades for cake and pastry
making, chopping raw and cooked meat,
vegetables, nuts, pate, dips, pureeing
soups and to also make crumbs from
biscuits and bread.
Do not use the
„S‟ blade for mixing flour.
If processing meat, first chop it into cubes
about 3cm x 3cm. Never place more than
1kg of meat in the processor at one time.
1.
Place detachable drive shaft into unit
2.
Place plastic bowl onto drive shaft
3.
Place „S‟ blade onto drive shaft within
bowl
4.
Place ingredients into bowl
5.
Place lid on bowl and click into place
TO USE STAINLESS STEEL DISCS
When using stainless steel discs, to ensure
the long life of your food processor DO
NOT use it continuously for more than 3
minutes at a time. Cool for 30 minutes
before next use.
Use the slicing side for cheese, carrots,
potatoes, cabbage, cucumber, courgette,
beetroot and onions.
Use the shredding side for cheese, carrots,
potatoes and foods of a similar texture.
Use the Julienne disc for grating Parmesan
cheese and potatoes.
1.
Place detachable drive shaft into unit
2.
Place plastic bowl onto drive shaft
3.
Place desired disc onto drive shaft
4.
Place lid on bowl and click into place
5.
Feed ingredients through food chute
TO USE MINI PROCESSOR BOWL
When using mini processor bowl, to
ensure the long life of your food processor
DO NOT use it continuously for more than
30 seconds at a time. Cool for at least 1
minute between uses and for longer after 3
cycles.
1.
Fit the drive shaft and main bowl onto
the processor base.
2.
Fit the mini processor bowl into main
bowl. Ensure the ribs on inside of mini
bowl chimney align with the slots in the
main bowl chimney .
3.
Place the small knife blade over the
drive shaft .
4.
Add the ingredients to be processed.
5.
Fit the lid and switch on.