Care and cleaning
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the cord from the electrical
outlet.
CAUTION: The blades on the
grating/shredding disc, the chopper
blade and blender blade unit are very
sharp. Exercise caution when handling
them, emptying the bowl and cleaning.
Injury may occur from misuse. Switch
off the appliance and disconnect from
power before changing accessories or
approaching parts that move.
NOTE: Do not attempt to sharpen the
cutting edges of the chopping blade or
the reversible disc. They are
permanently sharpened at the factory
and will be ruined if you attempt to
sharpen.
1. Before cleaning, be sure the unit is
switched off and the cord is unplugged.
2. Whenever possible, rinse parts
immediately after processing or
blending for easy cleanup.
3. Wipe the base, control area, and feet
with a damp cloth and dry thoroughly
stubborn spots can be removed by
rubbing with a damp cloth and a mild,
non-abrasive cleaner. Do not immerse
the base in liquid.
4. Removable parts should be washed
by hand.
Wash in hot, sudsy water,
rinse, and dry thoroughly. If necessary,
use a small nylon bristle brush to
thoroughly clean the jugs and food
chute/cover. This type of brush will also
help prevent cutting yourself on the
blades and disc.
5. Do not use rough scouring pads or
cleansers on any plastic or metal parts.
6.
Do not fill processor or blender jug with
boiling water or place any of the parts
in boiling water. Some foods, such as
carrots, may temporarily stain the
bowl. Wiping with a cloth dipped in
vegetable oil helps remove
discolouration. To remove stains,
make a paste of 1 tablespoon baking
soda and two tablespoons warm water.
Apply the paste to the stains and rub
with a cloth, rinse in sudsy water to
remove the baking powder then dry
well.
Before first use
Before first use
Carefully unpack the Food Processor and
remove all packaging material.
When unpacking the product and removing
the packaging material, handle the blades
with great care as these items come pre-
sharpened.
Wash all parts except the base in warm
soapy water. Rinse and dry thoroughly
before use.
Be sure to read this user manual
thoroughly.
